Lamination Technician
Decavo, LLC Decavo, LLC Hood River, OR Hood River, OR Full-time Full-time $13.
50 - $30.
00 an hour $13.
50 - $30.
00 an hour Reporting To:
Department Lead and Production Manager Schedule:
Monday - Friday 5:
00 AM - 1:
30 PM (with minimal OT & weekends when necessary) POSITION SUMMARY Composite Technicians will be producing parts and assemblies for the aerospace, unmanned aerial vehicle (UAV), and other product line industries that are developed at our facility.
DUTIES AND RESPONSIBILITIES The essential functions include, but are not limited to the following:
Apply advanced technical skills and knowledge to fabricate composite parts using prepreg epoxy resins with carbon, fiberglass, Kevlar, and quartz fibers.
It is preferred that the candidate have experience in reading and interpreting work instructions, specifications sketches, job travelers, planning documents and engineering drawings.
Work under standard supervision applying trained procedures and collaborative solutions to meet work requirements.
Priorities are determined by management.
Physical Demands:
While performing the duties of this job, the employee is regularly required to stand.
The employee is often required to sit, reach, climb, stoop, kneel, bend, crouch, or crawl.
The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
This position requires eye-hand coordination and manual dexterity.
Equipment Operated:
Vacuum pumps, heat ovens, platen presses, hydraulic presses, special hand tools, ladders and mechanical stands.
Work Location:
Open shop environment, and clean room.
Protective Equipment Required:
Goggles, safety glasses, face shields, ear protection, aprons, gloves, safety harnesses and respirators.
MINIMUM QUALIFICATIONS Requires a High School Diploma or GED.
Must have experience working with laminating advance composite materials.
Knowledge of releases, prepreg, resins, composite bagging, adhesives, and curing presses.
Ability to communicate effectively, both orally and in writing, with co-management, and vendors.
Proficient use of Microsoft Office products (Excel, PowerPoint, Word) and ERP/accounting software experience preferred.
Fabricate composite molds and parts to meet customer specifications.
Take personal responsibility for workmanship and productivity.
Ability to follow instructions and take direction.
Ability to anticipate and solve practical problems.
Must have strong mechanical aptitude Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position.
Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.
Job Type:
Full-time Pay:
$13.
50 - $30.
00 per hour
Benefits:
401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Health savings account Life insurance Paid time off Parental leave Referral program Vision insurance Schedule:
8 hour shift Supplemental pay types:
Bonus pay Application Question(s):
Do you have knowledge of releases, prepreg, resins, composite bagging, adhesives and curing presses? Education:
High school or equivalent (Preferred)
Experience:
working with laminating advance composite materials:
1 year (Required) Work Location:
In person Apply advanced technical skills and knowledge to fabricate composite parts using prepreg epoxy resins with carbon, fiberglass, Kevlar, and quartz fibers.
It is preferred that the candidate have experience in reading and interpreting work instructions, specifications sketches, job travelers, planning documents and engineering drawings.
Work under standard supervision applying trained procedures and collaborative solutions to meet work requirements.
Priorities are determined by management.
Physical Demands:
While performing the duties of this job, the employee is regularly required to stand.
The employee is often required to sit, reach, climb, stoop, kneel, bend, crouch, or crawl.
The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
This position requires eye-hand coordination and manual dexterity.
Equipment Operated:
Vacuum pumps, heat ovens, platen presses, hydraulic presses, special hand tools, ladders and mechanical stands.
Work Location:
Open shop environment, and clean room.
Protective Equipment Required:
Goggles, safety glasses, face shields, ear protection, aprons, gloves, safety harnesses and respirators.
Requires a High School Diploma or GED.
Must have experience working with laminating advance composite materials.
Knowledge of releases, prepreg, resins, composite bagging, adhesives, and curing presses.
Ability to communicate effectively, both orally and in writing, with co-management, and vendors.
Proficient use of Microsoft Office products (Excel, PowerPoint, Word) and ERP/accounting software experience preferred.
Fabricate composite molds and parts to meet customer specifications.
Take personal responsibility for workmanship and productivity.
Ability to follow instructions and take direction.
Ability to anticipate and solve practical problems.
Must have strong mechanical aptitude 401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Health savings account Life insurance Paid time off Parental leave Referral program Vision insurance 8 hour shift Bonus pay Do you have knowledge of releases, prepreg, resins, composite bagging, adhesives and curing presses? High school or equivalent (Preferred) working with laminating advance composite materials:
1 year (Required).
Estimated Salary: $20 to $28 per hour based on qualifications.
50 - $30.
00 an hour $13.
50 - $30.
00 an hour Reporting To:
Department Lead and Production Manager Schedule:
Monday - Friday 5:
00 AM - 1:
30 PM (with minimal OT & weekends when necessary) POSITION SUMMARY Composite Technicians will be producing parts and assemblies for the aerospace, unmanned aerial vehicle (UAV), and other product line industries that are developed at our facility.
DUTIES AND RESPONSIBILITIES The essential functions include, but are not limited to the following:
Apply advanced technical skills and knowledge to fabricate composite parts using prepreg epoxy resins with carbon, fiberglass, Kevlar, and quartz fibers.
It is preferred that the candidate have experience in reading and interpreting work instructions, specifications sketches, job travelers, planning documents and engineering drawings.
Work under standard supervision applying trained procedures and collaborative solutions to meet work requirements.
Priorities are determined by management.
Physical Demands:
While performing the duties of this job, the employee is regularly required to stand.
The employee is often required to sit, reach, climb, stoop, kneel, bend, crouch, or crawl.
The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
This position requires eye-hand coordination and manual dexterity.
Equipment Operated:
Vacuum pumps, heat ovens, platen presses, hydraulic presses, special hand tools, ladders and mechanical stands.
Work Location:
Open shop environment, and clean room.
Protective Equipment Required:
Goggles, safety glasses, face shields, ear protection, aprons, gloves, safety harnesses and respirators.
MINIMUM QUALIFICATIONS Requires a High School Diploma or GED.
Must have experience working with laminating advance composite materials.
Knowledge of releases, prepreg, resins, composite bagging, adhesives, and curing presses.
Ability to communicate effectively, both orally and in writing, with co-management, and vendors.
Proficient use of Microsoft Office products (Excel, PowerPoint, Word) and ERP/accounting software experience preferred.
Fabricate composite molds and parts to meet customer specifications.
Take personal responsibility for workmanship and productivity.
Ability to follow instructions and take direction.
Ability to anticipate and solve practical problems.
Must have strong mechanical aptitude Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position.
Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.
Job Type:
Full-time Pay:
$13.
50 - $30.
00 per hour
Benefits:
401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Health savings account Life insurance Paid time off Parental leave Referral program Vision insurance Schedule:
8 hour shift Supplemental pay types:
Bonus pay Application Question(s):
Do you have knowledge of releases, prepreg, resins, composite bagging, adhesives and curing presses? Education:
High school or equivalent (Preferred)
Experience:
working with laminating advance composite materials:
1 year (Required) Work Location:
In person Apply advanced technical skills and knowledge to fabricate composite parts using prepreg epoxy resins with carbon, fiberglass, Kevlar, and quartz fibers.
It is preferred that the candidate have experience in reading and interpreting work instructions, specifications sketches, job travelers, planning documents and engineering drawings.
Work under standard supervision applying trained procedures and collaborative solutions to meet work requirements.
Priorities are determined by management.
Physical Demands:
While performing the duties of this job, the employee is regularly required to stand.
The employee is often required to sit, reach, climb, stoop, kneel, bend, crouch, or crawl.
The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
This position requires eye-hand coordination and manual dexterity.
Equipment Operated:
Vacuum pumps, heat ovens, platen presses, hydraulic presses, special hand tools, ladders and mechanical stands.
Work Location:
Open shop environment, and clean room.
Protective Equipment Required:
Goggles, safety glasses, face shields, ear protection, aprons, gloves, safety harnesses and respirators.
Requires a High School Diploma or GED.
Must have experience working with laminating advance composite materials.
Knowledge of releases, prepreg, resins, composite bagging, adhesives, and curing presses.
Ability to communicate effectively, both orally and in writing, with co-management, and vendors.
Proficient use of Microsoft Office products (Excel, PowerPoint, Word) and ERP/accounting software experience preferred.
Fabricate composite molds and parts to meet customer specifications.
Take personal responsibility for workmanship and productivity.
Ability to follow instructions and take direction.
Ability to anticipate and solve practical problems.
Must have strong mechanical aptitude 401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Health savings account Life insurance Paid time off Parental leave Referral program Vision insurance 8 hour shift Bonus pay Do you have knowledge of releases, prepreg, resins, composite bagging, adhesives and curing presses? High school or equivalent (Preferred) working with laminating advance composite materials:
1 year (Required).
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
